Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph
Specification:
Model | DSO1202B | DSO1102B | DSO1062B |
Oscilloscope mode | |||
Bandwidth | 200MHz | 100MHz | 60MHz |
Real-time Sample Rate | 1GSa/s | ||
Equivalent Sample Rate | 25GSa/s | ||
Record Length(Sample Points) | Single-channel: Maximum 1M; Dual-channel:Maximum 512k | ||
SEC/DIV Range | 2nS/div-2000S/div (in a 2, 4, 8 sequence) | ||
Delay Time Accuracy | 500ps | ||
Vertical | |||
A/D Converter | 8-bit resolution | ||
VOLTS/DIV Range | 2mV/div¡«5V/div at input BNC | ||
Position Range | ±50V(5V/div), ±40V(2V/div¡«500mV/div), 2V(200mV/div¡«50mV/div)±400mV(20mV/div¡«2mV/div) | ||
Rise Time at BNC | ≤1.7ns | ≤3.5ns | ≤5.8ns |
DC Gain Accuracy | ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div |
||
Trigger | |||
Trigger Sensitivity (Edge Trigger Type) |
DC: CH1/CH2(Typical) 1div from DC to 10MHz; 1.5div from 10MHz to Full EXT£¨Typical£© 200mV from DC to 40MHz EXT/5£¨Typical£© 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity |
||
Trigger Level Range | CH1, CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V |
||
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns) |
CH1, CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) | ||
Holdoff Range | 100ns-10s | ||
Trigger Type | |||
Edge | Trigger on the rising or falling edge | ||
Pulse Width | Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s |
||
Video | Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) |
||
Slope | Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s |
||
Overtime | from the rising or falling edge Set Time: 20-10s |
||
Alternate | Internal trigger on edge, pulse width, video or slope | ||
Measurement | |||
Cursors | Manual: The difference between voltage cursors ¡÷V; the difference between time cursors ¡÷T; 1/¡÷T calculated by Hz. Tracing: The voltage and time at a waveform point |
||
Automatic | Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width | ||
Meter Mode | |||
Max.Resolution | 6,000 Counts | ||
DMM Testing Modes | Voltage, Current, Resistance, Capacitance,Diode & Continuity | ||
Max. Input Voltage | AC: 600V, DC: 800V | ||
Max. Input Current | AC: 10A, DC: 10A | ||
Input Impedance | 10 MΩ | ||
Display | |||
Type | Right angle 5.6 16-digit color LCD | ||
Resolution | 640 x 480 dots | ||
Contrast | 16 gears, with the progress bar to show adjustment | ||
Interface | USB host and USB slave, Lan Optional | ||
Power Supply | |||
Voltage | DC Input: 12-17VDC, 1500mA | ||
Mechanical | |||
Size | 245 x 163 x 52 (mm) |
Detail Pictures: